The Yamaha Stagepas 200BTR Battery-Powered Portable PA System is a compact, portable and battery-powered PA speaker. The first ever battery-powered PA system from Yamaha
FEATURES:
- 180 W (HF: 30 W + LF: 150 W) Class-D amplifier
- 1.4” HF + 8” LF high-quality coaxial compression driver
- 5-channel digital mixer (3 monaural mic/line + 1 stereo line)
- Main output multi-band compressor “MODE”
- 1-knob EQ/preset for each channel
- High-grade SPX digital reverb (4 program, parameter control), delay, chorus
- Hi-Z input
- Equipped with link-out/monitor out
- Supplied rubber stand allows inclining at 30 or 60 degrees
- Compatible with audio streaming via Bluetooth
- Can be controlled remotely via an iOS or Android device using the dedicated STAGEPAS Controller app
- Optional BTR-STP200 battery included
- Optional CASE-STP200 carry case for convenient carrying
SPECIFICATIONS:
- Type : 2-way Bi-amp Powered Speaker with mixer
- Mixing channels : 5 (Mono x3 + Stereo x1)
- Input channel functions : Hi-Z: CH2/3, 1-knob EQ/Preset: CH1-3/ST
- Output channel functions : MODE (SPEECH/MUSIC/CLUB)
- Inputs : Mono x3 (mic/line) + Stereo/Mono x1 (line)
- Outputs : Monitor/Link out x1
- Bluetooth : Ver.5.0, A2DP (SBC, AAC), Class 1
- Control and others : STAGEPAS Controller (iOS/Android app)
- On-board processors : SPX digital reverb (4 program, parameter control), delay, chorus
- Speaker type : Coaxial speaker with compression driver
- Frequency range (-10dB) : 60 Hz – 20 kHz
- Coverage area : H90゚ x V90゚
- Crossover : 2.0 kHz
- Maximum output level (1m; on axis) : 125 dB SPL *1
- Components : LF : 8″ Cone, 2.0″ voice coil | HF: 1″ throat compression driver, 1.4″ voice coil
- Amplifier class : Class-D
- Power rating : Dynamic : 180 W (LF: 150 W, HF: 30 W)
- Cooling : Natural convection (no fan)
- Power consumption : 10 W (Idle), 20 W (1/8 power)
- Power requirements : 100-240 V 50/60 Hz, or 29.6 Vdc *2
- Battery
– Type : Rechargeable Lithium ion battery pack
– Capacity : 79.92 Wh (2700 mAh, 29.6 V)
– Operating Time : Maximum 10 hours, 1/16 power continuous 8 hours
– Charging Time : Approx. 4 hours - Cabinet material : Plastic (ABS)
- Handle : Top x1
- Pole socket : Φ35 mm x1 (Side)
- Floor Monitor Angle : 30° or 60°
- Dimensions (W x H x D) : 300 x 308 x 301 mm (11.8″ x 12.1″ x 11.9″)
- Weight : 12.5 kg (27.6 lbs) (Including battery)
- Accessories : Power cord x 1, Battery x 1