Shure GLXD24R+/B58 Digital Wireless Rack System with Beta 58 Vocal Microphone

            SPECIFICATIONS:

• System
• Compatibility
• With Frequency Manager: Up to 11 compatible systems in typical setting, and up to 16 under ideal conditions
• Without Frequency Manager: Up to 4 compatible systems in typical setting, and up to 8 under ideal conditions
• System Operating Range:
• Indoors: Up to 30 m (100 ft.) typical, with a maximum of 60 m (200 ft.) under ideal conditions
• Outdoors: Up to 20 m (65 ft.) typical, with a maximum of 50 m (165 ft.) under ideal conditions
• Transmit Mode: Shure Proprietary Digital – Dual Band (2.4 GHz and 5.8 GHz)
• Audio Frequency Response: 20 Hz – 20 kHz Note: Dependent on microphone type
• Dynamic Range: 120 dB, A-weighted
• RF Sensitivity: -88 dBm, typical
• Total Harmonic Distortion: 0.07%, typical
• RF Output Power: 10 mW E.I.R.P. max
• Operating Temperature Range: -18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range.
• Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
• Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces
• positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 6,35 mm output.
• Battery Life: Up to 12 hours
• NOTE: All Specifications are subject to change. Performance may vary depending on country regulations and operating environment.

          GLXD4+ Receiver

• Dimensions: 7.2 x 4.8 x 1.6 in. (182.8 x 121.97 x 40.3 mm), H x W xD, antennas folded
• Weight: 10.9 oz (310 g)
• Housing: Molded Plastic
• Power Requirements: 14.5 V – 17 V, 600mA
• Spurious Rejection: >35 dB, typical
• Gain Adjustment Range: -20 to 40 dB in 1 dB steps
• Phantom Power Protection: Yes
• Configuration
• XLR Output, Impedance balanced
• 6.35 mm (1/4“) output, Impedance balanced
• Impedance
• XLR Output: 100 Ω
• 6.35 mm (1/4“) output: 100 Ω (50 Ω, Unbalanced)
• Maximum Audio Output Level
• XLR connector (into 600 Ω load): 1 dBV
• 6.35 mm (1/4“) connector (into 3 kΩ load): +8.5 dBV
• Pin Assignments
• XLR Output: 1=ground, 2=hot, 3=cold
• 6.35 mm (1/4“) connector: Tip=audio, Ring/Sleeve=ground
• RECEIVER ANTENNA INPUT
• Impedance: 50 Ω
• Antenna Type: Dual Band 1/2 Wave Sleeve Dipole, non-removable
• Maximum Input Level: −20 dBm

          GLXD2+/Beta58 Capsule

• Polar Pattern: Supercardioid
• Dimensions
• 51 mm, 2.0 in.
• 246mm, 9.9 in.
• 37 mm, 1.5 in.
• Weight: 225 g (7.9 oz), without battery
• Housing: Aluminum alloy, ABS plastic
• Power Requirements: 3.6 V Rechargeable Li-Ion
• RF Output Power: 10 mW E.I.R.P. max
• Maximum Input Level: 146 dB SPL